About us and the boat

About us and the boat:

We were lucky enough to retire early at the start of 2013 so we could head off and "live the dream" on board our Nordhavn 47 Trawler Yacht. The idea is to see some of the planet, at a slow 6 - 7 knots pace. There are no fixed goals or timings, we just had a plan to visit Scotland and then probably the Baltic before heading south.

The idea is to visit the nicer areas in these latitudes before heading south for warmer weather. If we like somewhere, we will stay for a while. If not, we will just move on. So, for the people who love forward planning and targets, this might seem a little relaxed!

If anyone else is contemplating a trawler yacht life, maybe our experiences will be enough to make you think again, or maybe do it sooner then you intended!

The boat is called Rockland and she is built for long distance cruising and a comfortable life on board too. If you want to see more about trawler yachts and the Nordhavn 47 in particular, there is a link to the manufacturers website in our "useful stuff" section. For the technically minded, there is a little info and pictures of the boat and equipment in the same section

Regards

Richard and June

Sunday, 5 May 2024

Tinkering around and waiting for many things

Thanks to the half crown that the dentist was unhappy with, we had another trip to Hythe, this time a real whistlestop thing. Fortunately the replacement from the lab was a better fit to the other teeth and the nice dentist lady was happy with it. Our guess is that she had to be - it was costing them quite a lot and the cynic in us says that it was going to be fitted no matter what. An unfair comment probably, she seemed very intent on doing a good job.

The return run to Penarth was a little bit different and it ended up as a real pain - the M4 near Bristol was closed thanks to a truck fire so we had a monster diversion up country to avoid the carnage in that area. We had already made one diversion, heading to Fareham first to visit the vinyl supplier that the local trim shop uses. Getting the right thickness material with as little grain as possible for our pilothouse headlining was proving tricky so we went to look at the actual rolls of material and picked the one we wanted. We then brought it back with us to help speed up the job.

When we arrived back, the rather annoying trip was forgotten as we enjoyed this view of Malaspina astern of us:


Just a perfect evening albeit a tad chilly....  We then amused ourselves with bits of hull polishing, a run up through the Brecon Beacons in the drizzle (ended up driving through the clouds) and a rather good Sunday lunch with Simon and Nikki as a "farewell" thing in case we didn't get to see them again before we depart Penarth. 

Meanwhile, Martin and Inge, the owners of Malaspina had arrived from Canada, gone to the Netherlands and returned to Penarth. All rather hard to keep up with really. We much enjoyed catching up with them and admired their diligence in cleaning and polishing their already very shiny Nordhavn:



The picture gives you a good idea of just how high the bow is on a Nordhavn 47. Martin is no pygmy. 

Locally, the excitement was that the resident swans had a third go at making a nest and this time seemed serious about hatching whatever eggs she has produced - earlier on this spring they abandoned one egg in their first nest:




Maintenance news:

We pressed on with the hull polishing fun and made reasonable progress between rain showers and freezing cold winds. Wayne, the lovely trimmer guy, returned the headlining panels for the pilothouse when he'd covered them using the material we brought back from our Hythe trip and refitted them. A way nicer look that the bare insulation and dangling wires we'd been enjoying:



A fiddly little job was replacing the battery in the crew's Sena wireless headset. We use them for communication when berthing and the battery life had become pretty poor. We'd learned from the Sena folks that a normal USB phone charger was pushing in way too many amps for the little lithium battery and that had shortened the life of it. Naturally, in the manual they don't say "charge at 1 amp or less", just in a supplementary document they will email you when you talk to them. Thanks to Andrew (the owner of Zephyros the N43) we ordered the right battery, dismantled the headset and removed the old battery which has this tiny connector on it:



That has to be cut off and soldered onto the new battery:



then refitted into the earpiece under the loudspeaker you can see off to one side:


Hopefully the crew's headset will have a way better "talk time" now.

The final must do job before we depart Penarth was replacing the engine start batteries. We mentioned beforehand that they were the originals and had finally given up. Not bad for 17 years in service really. We looked at replacing them with lifeline AGM on a like for like basis but the price of those premium batteries (and availability) was wild - over £1000 each plus delivery. We had decided to replace the wing / genset start batteries at the same time as they are the same vintage and were showing signs of age (lower resting voltage than expected) but were still working fine. Buying 4 batteries to make up the two 24v start banks with Lifeline branding on them would be rather an eye-watering bill. We will certainly go for lifeline again when the domestic bank needs renewal but for lightly stressed and very lightly cycled start batteries, we opted to go cheaper.The marine engineering guys in Penarth said that they'd had good experience and service from Monbat units so we opted for those.

The dinghy crane made light work of removing the old heavy lifelines into a marina trolley:




and then lifting the new replacements into the lazarette:



Standardisation is a wonderful thing. The answer to "when is a 4D AGM battery not a 4D AGM battery" is an interesting one. We'd had fun finding the right case size to fit into our specially made battery trays but nothing prepared us for this amusement. Here are the originals:


and the new ones:


Yes, the terminals were reversed, meaning that the battery cabling had to be re-routed / gently persuaded to swap sides. They are VERY thick and heavy cables so it was far from easy. Luckily, as the captain is still begin ultra careful with his shoulder following the surgery,  Jim the engineer guy was doing the grunt work and had that fun. Accessing the main engine batteries in their cupboard in the lazarette was a pig of a job. The wing / genset batteries are behind the wing engine in the engine room itself and way more accessible. Not a fun job but one that had to be done.


No comments:

Post a Comment

Thanks for your ideas / cheek / corrections / whatever! They should hit the blog shortly after the system checks them to make sure they will not put us or you in jail.....